Estate Fencing Installation Guide

A member of Steel Landscaping Company installing Estate Fencing

Our continuous estate fencing is of the highest quality, with no clips or bolts.

We weld every rail, and every metre, offering the maximum structural integrity whilst providing seamless joints, so our fencing naturally flows with any land at any gradient.

We install both traditional estate fencing and deer fencing on site. 

These are usually fabricated to standard sizes, up to 1.2 metres high for estate fencing, and up to 2 metres for deer fencing, we can also fabricate and install any kind of bespoke fencing to suit your requirements.

Our standard rails are typically a 20mm diameter top rail with round or flat under rails. The spacings between each rail typically decrease towards the ground (unless stated otherwise).

How is Steel Estate Fencing Installed?

https://www.youtube.com/watch?v=4utzhaFWJG0
Self-Installation Steel Edging Explainer Instruction Video

The installation of your fencing can be broken down into sections:

  1. Area planning and setting out
  2. All intermediate posts will be knocked in the ground at one-metre intervals with every third post including a welded-on 150mm thrust plate postcreted in the ground.
  1. Feeding 6-metre rails through the intermediate posts.
  2. The rails will be staggered between the posts and welded together for maximum structural integrity and longevity.
  3. All welds will be chipped, wire brushed, and paint primed to prevent any rusting.
  4. All fencing is sprayed with zinc phosphate black primer before arrival on-site and topcoat, 100-micron minimum coating sprayed on site. The standard finish for our traditional estate fencing and deer fencing is satin black, unless you have chosen a different option.

Please note that all rails are delivered in 6m lengths.

https://www.youtube.com/watch?v=USAlV-TMi94

Self-Installation Steel Edging Explainer Instruction Video

Shopping Basket